0844 871 1122
Date And Time Change Instructions
Samsung - All models
Bosch I33E & Duo
1. Using a display handset dial *48 to enter programming
2. Use the down arrow on the handset to scroll down to Date / Time and press Enter
3. Reset the Date and Time following the format on the screen
4. Use the down arrow to scroll down to End
5. Use the Break key to exit programming or lift the handset and replace it to exit programming
Ericsson BP50 & BP250
1. *00#
2. Select System Programming
3. 33333
4. 2nd #
5. 6103
6. 2nd #
7. 2nd #
8. Enter the time HH MM SS
9. 2nd #
10. C to exit programming
Ericsson BP Select
1. Press hold
2. Dial * 1234
3. Push down the cursor key (this is the second key in from the left on the second row of buttons below the screen)
4. Push until display says "Command Number"
5. Dial 01 then push down the cursor key
6. Enter the Date i.e. 01
7. Enter the month i.e. 01
8. Enter the year i.e. 2000
9. Enter the day i.e 1 for Sunday, 2 for Monday, 3 for Tuesday etc...
10. Enter the Time i.e. 09:30
11. Push down the cursor key
12. Push the SPK button
13. Telephone will return to normal display
Plessey GPT DXE
FROM EXTENSION 10 OR OPERATOR POSITION
1. Ensure all lines are idle
2. Lift handset and listen for dialling tone
3. Dial set shift *7 HHMM (correct time in 24 hour clock) set
4. Replace handset
Plessey GPT PKS1
1. Press WR
2. Press Clock
3. Press # for PM if required
4. HHMM
5. Press * #
6. Press WR
Plessey GPT PKS2
1. Lift handset
2. Press Save and Clock
3. Dial the Year i.e. 2003 followed by the *
4. Dial the Month and Day i.e. 0401 then *
5. Dial the day i.e. 1 for Monday then *
6. Dial the time HH MM (in 24 hour clock) i.e. 0715
7. Dial * then replace the handset
Plessey PKS1 616
AT A DISPLAY HANDSET PRESS AND HOLD DOWN THE RS BUTTON
1. Press Clock
2. Press *
3. Dial the four digit time i.e. 0930
4. Release the RS button
Plessey Masterline PKS1 616
AT EXTENSION 10 ONLY WHEN THE EXTENSION IS IDLE
1. Lift the name card covering the DSS keys (F1-F16)
2. Press the WR button with a pen or pencil
3. Press the clock key
4. Example:
09.30 A.M. - Key 0930
09.30 P.M. - Key #0930
Press the * Key
Press the #Key
Press the WR button
5. After 10 seconds the new time will appear on all display phones. Replace the name card.
Siemens HiCom 100 Series
WITH A DISPLAY HANDSET PLUGGED INTO THE FIRST EXTENSION (USUALLY 20 OR 200)
1. Press Service
2. Press Hold
3. Dial 756
4. Press Service
5. Dial 9 * 04 *
6. Dial the hours (00-23) followed by *
7. Dial the minutes (00-59) followed by *
8. Lift and replace the handset
Siemens ISDX/Realitis
On Operator console:
1. Dial # # # 2
2. Enter time HHMM (24 hour format)
3. Press RLSE
Siemens Hipath 3000
With the Handset down:
1. Dial *95
2. 31994 tick
3. 31994 tick
4. 52 tick
5. HHMM (24hr) tick
6. Press speaker key
HiCom Office v1.0 or HiCom 112 & 118
MUST BE DONE FROM EITHER OF THE FIRST TWO KEYPHONES ON THE SYSTEM. YOU MUST HAVE DISPLAY PHONES PLUGGED IN
1. With the handset down dial *95 and press the tick key
2. At system administrator menu dial 2
3. And press the tick Key
4. Dial the new time in HHMM format and then press the tick key
5. Press the speaker or release key to return to normal operation
HiCom Office v2.2
MUST BE DONE FROM EITHER OF THE FIRST TWO KEYPHONES ON THE SYSTEM. YOU MUST HAVE DISPLAY PHONES PLUGGED IN
1. With the handset down dial *95
2. At user prompt dial *95 and press the tick key
3. At Ident / password prompt press the tick key
4. At system admin user screen dial 12 and press the tick key
5. Now dial the new time in HHMM
6. Press the speaker key to go back to normal operation
Meridian Modular / Compact
PLACE THE PROGRAMMING OVERLAY ON ANY M7310 OR M7324 HANDSET.
1. Press feature ** 23646
The Display will now read password
2. Enter the administration password. (23646)
The Display will now read 1.Sys Speed Dial
3. Press Next until the display reads “3.Time and Date”
4. Press Show
The Display will now read reads “Time”
5. Press Change
The Display reads “Hour”
6. Press Change
7. Enter the hour HH (12 or 24 Hour format)
8. Press Next
The Display Reads “Minutes”
9. Press Change
10. Enter The Minutes MM
11. Press Next
12. Press Change to toggle between Am and Pm then Press release to exit.
Meridian Modular / Compact Plus
Place the programming overlay on extension 221 (or lowest extension number if you do not have an extension 221) and use an M7310 or M7324 handset.
1. Press feature ** 266344
The Display will now read password
2. Enter the administration password. (23646)
The Display will now read “Terminals and Extns”
3. Press Next until the display reads “Time and Date”
4. Press Show
The Display reads “Time”
5. Press Change
The Display reads “Hour”
6. Press Change
7. Enter the hour HH (12 or 24 Hour format)
8. Press Next
The Display Reads “Minutes”
9. Press Change
10. Enter The Minutes MM
11. Press Next
12. Press Change to toggle between AM and PM then Press release to exit
The above is the overlay for the M7310 and M7324 handsets. It is placed over the keys that are lit when in programming mode.
Heading
Back
- -
- -
- -
Show
Next
The above here shows the key layout for the new version handsets M7310N and M7324N mainly used on the Norstar Plus.
The latest Norstar Plus has a short cut to advance/retard the clock by one hour so it may be worth trying the following from extension 221.
Feature **393 to more clock forward 1 hour
Feature **2225 to move clock back 1 hour
Nortel Option and CS1000 Systems
To change the time, follow these steps:
1 Select an idle loop key.
2 Press Change Time (MTM).
3 Enter the time using the 24-hour clock for hours and minutes (00 00).
4 Press Change Time (MTM).
5 Press Rls.
To change the date, follow these steps:
1 Select an idle loop key.
2 Press Change Date (MDT).
3 Enter the date using two digits for day, month, and year (dd mm yy).
4 Press Change Date.
5 Press Rls.
Panasonic 'A' Series
1. Push the on / off button
2. Dial * 5
3. Dial the hours HH (09)
4. Dial the minutes mm (59)
5. Push the on / off button
Panasonic ICX / S-ICX
Uses Any Ext with appropriate class of service, enter the following.
Prog
**Conf (81 displayed)
000
Hold (display 0: YYMMDD
YYMMDD
Hold
HHMM (24hr)
Hold
0-6 (Sun-Sat)
Hold
Prog
On/Off
Panasonic DBS
AT THE OPERATOR HANDSET PRESS THE ON / OFF BUTTON
1. Press Recall
2. Dial #3
3. Dial Date DDMMYYYY
4. Dial 4 digit time i.e. 1530
5. Press the ON / OFF button
Panasonic KXT-D
1. Press Program button
2. Dial **1234
3. Dial 000
4. Press Next button twice
5. Dial the hour HH (12 hour)
6. Press >
7. Dial the minutes MM
8. Press >
9. Press Auto Answer button to select AM or PM
10. Press Store button
11. Select End
12. Press Program button
Panasonic KXT1232
1. Set Memory Switch on back of phone to "Program"
2. Dial 0
3. Enter Year, last two digits i.e.99
4. Enter Month (01-12)
5. Enter Day (1-31)
Enter Day of Week i.e. 0=Sunday, 1=Monday, 2=Tuesday etc...
Enter the Hour HH (00-12)
Enter the Minute MM (1-59)
Dial 0 for AM or 1 for PM
6. Press Autodial button
Return Memory switch to original position
Panasonic KXT308 - KXT616
FROM EXTENSION 21
1. Lift handset
2. Dial 77
3. Dial Hour (00-12)
4. Dial Minutes (1-59)
5. Dial 0 for AM, 1 for PM
6. Dial#
7. Replace handset
Panasonic KX-TES824/KX-TEA308
Use first extension (ext. 201 or 21 default) only
PRESS PROGRAM
Press 0
YYMMDD
Day of the Week (0=Sunday, 1=Monday ..... 6=Saturday)
HHMM (12 hour)
0 for AM 1 for PM
Store
PRESS PROGRAM
Panasonic KXTDA & NCP
BST changes are automatically updated by the system – No user commands required.
Panasonic SDBS
FROM OPERATOR EXTENSION
1. Press ON / OFF
2. Press Recall
3. Dial #4
4. Dial the time 4 digits i.e. 0930
5. Press ON / OFF
Avaya SDX 40E
FROM A SYSTEM MANAGERS PHONE (USUALLY 20 OR 22)
1. Press 8 P (if this doesn't work try * P)
2. Enter Password 9999
3. Enter new time i.e. 0930
4. Press H
5. Press P
Avaya SDX 60/180/420
FROM AN FT4 HANDSET
1. Press *P
2. Enter system password
3. Press AAAAA
4. Press E
5. Press A
6. Enter time...HH#MM#SS i.e. 09#30#00
7. Press E, then Press P
Avaya SDX INDeX
FROM THE SYSTEM MANAGER PHONE (Identifiable by having SET UP on screen)
1. Press SET UP
2. Press TIME
3. Dial time HH:MM:SS
4. Press DONE
Avaya Definity
Avaya ACM
This system will get its time from the PC running the Manager program or from the Time server IP Address which can be any pc on the network.
Nortel BCM
This system obtains the date & Time from the PC used to program the system and cannot be set by the customer.
Toshiba DK16/24/56/96
FROM MAIN PHONE USUALLY EXT 10
1. With handset down
2. Press intercom 652
3. Enter time HH / MM / SS
4. Press the redial button (if your phone does not have redial button, press the # instead)
5. Press spk.
Toshiba DK280
FROM MAIN PHONE USUALLY EXT 200
1. With handset down
2. Dial internal #652
3. Enter time HH / MM / SS
4. Press redial
5. Press spk.
Mitel SX50 / SX20 / SX10
Time 24 HH Clock
1. Using the Console dial *15 (On the SX50 the Function key does the same as the *)
2. Enter the time in 24HH format
3. Press Release on the Console
4. Use the Break key to exit programming or lift the handset and replace it to exit programming
Time 12 HH Clock
1. Using the Console dial *14 (On the SX50 the Function key does the same as the *)
2. Enter the time in 24HH format
3. Enter the time in 24HH format
4. Press Release on the Console
Mitel SX200
To Change Time
1. Using the console dial *5 followed by HHMM
2. If using 12HH format follow HHMM with a * for PM
3. Press Release on the Console
To Change Date
1. Using the Console dial *15 followed by the date in the format mm DD YY
2. Press Release on the Console
Mitel SX2000
1. Log into SX2000
2. Type the following commands for date or time changes
3. Time hh:mm (e.g. time 14:44) or Date yyyy-mmm-dd (e.g. Date 2008-07-15)
4. The data or time will now be set
Mitel 3300
1. Log into 3300
2. Select the group admin tool
3. Under manage system options they have a ‘set time and date’ option, select this option.
4. Fill in the change time and change date boxes
5. Click OK.
LG GDK
From the attendant phone (dial 0 from any phone to find this)
Press the trans/pgm key
Dial #1 and then enter date YY: MM: DD (IE. 110118 for 18th Jan 2011)
Then enter the time HH:MM,
Press the HOLD key.
LG GSX
From station 100 dial Recall key,
dial 299
YY:MM:DD:HH:MM.
BT Inspiration
1. From the programming position extn 20, press the Phone setup key P and select ‘System programming’ by use of the arrow keys.
2. Enter the PIN 1111 and select ‘System’
3. Select Time and Date and enter the correct time and date
4. Press HANDS FREE.
In the event of a power failure, you may need to reset the time and date.
BT Revelation
1. From the programming position (Extension 20), dial 70 followed by the system PIN 111.
2. The Systemphone shows Dial admin code. Dial the admin code 4.
3. Enter the time in 24-hour format and press # (for example, enter 5.00 pm as 1700).
4. Enter the date in the format DDMMYY and press # (for example, enter 9 March 2001 as 090302)
5. Press HANDS FREE.
In the event of a power failure, you will need to reset the time and date as the time shown will be 00:00 and the date shown will be 01-01-95.
BT Versatility
1. From the Programming Extension, press the PROGRAMME Key
2. Press the Scroll Down Key (î) until ‘System programming’ is displayed
3. Select ‘System programming’.
4. Enter the System Programming Password 1111 and select ‘System’.
5. Select ‘Time and date’.
6. Enter the correct time in 24-hour format, (e.g. 2pm as 1400). The 'Display' will prompt for a date.
7. If you only wish to set the time select ‘Confirm’ and the 'Display' will revert to the Idle Menu.
8. Enter the date in dd/mm/yy format, (e.g. 10 December 1999 as 101299). When the date has been entered the 'Display' will revert to the Idle Menu.
9. Press the Hands-free Key to finish programming.
Note: In the event of a power failure, you will need to reset the time and date.
Note: Changes to the system Time will only take place when any external calls in progress at that time have cleared.
Note: If the Network Provider supplies the Caller Number 'Display' service (CDS) the system will take the time from the network provider.
©Maintel Holdings PLC 2012
